SIEMENS Washing Machine Repair Abu Dhabi
It's laundry day. You know this because the shirt you're wearing is eight years old and doesn't match your pants in any light. And there's a chance, just a chance, that you're wearing one black sock and one Navy blue sock. So you schlep a heaping hamper to the laundry room and carefully (or not so carefully) separate colors from whites. Then, you cram as many as will fit into the washer, throw in some detergent and hit the START button.
And nothing happens. Midea Washing Machine Repair Abu Dhabi
Suddenly, the piece of machinery you could always count on is on the fritz. Washing machines are the workhorses of the household appliance stable -- in fact, there's even a TED Talk about how they're the most important invention of the Industrial Revolution (source: Rosling]. And when they go down, they're the toughest to get by without. Who wants to drag their laundry down the street to the laundromat and fight other people for the privilege of shoving quarters into a strange machine that you suspect may not take the gentle cycle very seriously?
So, you have a choice to make: Call a repairman or see if you can tackle the problem yourself. Because washing machines do so many things, they may be harder to diagnose than they are to repair. For a household appliance, it's a pretty complicated gizmo - with special timing cycles that operate valves, motors that turn water on, spin the tub, drain water, and control the water temperature.
Note:Many newer washers include electronic diagnostics that can be interpreted from the owner's manual.
Caution:Before you do any work on a washer, make sure it's unplugged. Disconnect the grounding wire and the water hoses.
But diagnosis is possible, even for the do-it-yourselfer. It just takes a little patience and a basic understanding of washing machine mechanics. In this article, we will explain how to troubleshoot your washing machine and describe some quick repairs for common malfunctions.
Keep it Simple: Sometimes the Easiest Answer is the Right One
As we mentioned, washing machines are complex, but there are some simple steps you can take to diagnose common washer problems.
Is the washer receiving power? The first line of defense for any electrical repair is the sincere hope that it's as simple as a loose plug, damaged cord or malfunctioning wall outlet. If all of these check out, it could be a blown fuse or circuit breaker. Either of these can still be a pretty simple fix. But if the machine is receiving power and still not operating, then it's probably time to get to know your washing machine on a deeper level.
After checking for power, the next thing to look at is the water supply. Knobs may get turned inadvertently or hoses could become kinked, so a quick inspection of these parts may yield an answer. Make sure that both water faucets are turned on and that all hoses are properly extended, without kinks. If the washer has a water-saver button, make sure the button is depressed.
If it's not a power or water source issue, the next logical problem may be that the washing machine is not working properly because it needs to be cleaned. In the next section, we'll discuss how to keep dirty clothes from creating a dirty washer. GODREJ Washing Machine Repair Abu Dhabi
Washing Machines Need Cleaning, Too
We interrupt this scintillating mechanical exploration of washing machinemechanics to bring up a very important matter: why your laundry might stink even after a fresh wash. It may be that your washer is dirty.
Regularly clean the top and door of the washer to prevent the buildup of dirt and detergent. When you wash very linty materials, pull lint from the tub after removing the laundry. Built up lint can keep water and detergent from properly circulating and soap deposits themselves may cause laundry to smell bad. To solve this problem, fill the tub with water and add 1/2 cup of baking soda or 3 cups of white vinegar; then run the machine through the complete wash cycle sans laundry [source: DIY Life]. If the deposits are really bad, wash the inside of the tub with a solution of household ammonia and mild detergent. Rinse thoroughly and wipe the tub with liquid bleach. A word of caution: Rinse the tub thoroughly before wiping it out with bleach. The combination of ammonia and bleach forms a potentially dangerous gas called chloramine. This compound can cause health issues ranging from mild skin irritation to digestive and kidney
Finally, run the machine through a complete wash cycle before you put any more laundry in. Hopefully, you were able to address your issue with these simple steps.
But if your problem persists, don't despair. In the next section, we'll discuss disassembling the washer for more thorough repairs.
A Look Under the Hood: Disassembling the Washer
For most repairs and maintenance, the washer cabinet usually requires disassembly. The washer cabinet is where the magic happens, and houses all of the electrical components of the washer. Location varies by manufacturer, but typically this can be found on the top of the machine behind the control panel. This can be relatively simple based on the make and model, but be sure to consult the owner's manual to find out how to disassemble your particular machine properly. Caution:Make sure the power cord and water hoses are disconnected before you disassemble the cabinet or tip it over for service. SIEMENS Washing Machine Repair Abu Dhabi
Here are three steps for basic washer disassembly:
Step 1: Removing the control panel, typically located on top of the machine, usually requires loosening and/or removing a set of retaining screws. These may be located under a piece of molding or trim that needs to be removed in order to see them. Knobs on the control panel are usually friction-fit and will pull off, while others are held by small setscrews, which do not have heads like a typical slotted screw, at the base of the knob. Loosen the setscrews with a screwdriver or Allen wrench and pull the knobs straight off the shafts.
Step 2: To remove the service panel, you also need to remove the retaining screws. First, make sure the machine and the hoses are drained of water. Tip the washer over on its front or side to gain access through the bottom of the machine, which is generally open and doesn't have a service panel.
Step 3: To remove the top of the cabinet, insert a stiff-bladed putty knife into the joint between the top and side panels and give the knife a rap with your fist. This should release the spring clips so that the top can be removed.
Part of what makes washers so hard to repair is that they have so many control devices (components that control other functions, such as switches and timers). Now things start to get a bit more complicated, but don't give up yet. In the next section we will walk you through servicing these slightly more sophisticated parts.
Which Switch to Fix?
Washing machines run through elaborate cycles with multiple settings, which makes them different from your typical household appliance, , that may perform just one or two functions. Here's how to repair some of the common switches and timers.
Lid Switch
The lid switch on a washer often serves as a safety switch, and if it's not working, or if the switch opening in the lid is clogged with detergent, the machine will not run. To check and repair the lid switch:
Step 1: Unplug the machine. You can clean out the lid switch port using a wooden manicure stick or even a chopstick.
Step 2: If cleaning doesn't help, remove the top of the cabinet to access the switch itself. With the switch exposed, check to make sure the screws have not become loose. Loose screws can cause the switch to move when the lid is closed or as the machine goes through its cycles. Check the terminals of the switch to make sure they're tight.
Temperature Selector Switch
This control panel switch regulates the temperature of the water in the tub. It also plays a role in controlling the fill cycle. If you suspect this switch is faulty, remove it and take it to a professional service person for testing because this takes special equipment.
If there's a problem with both water temperature and tub filling cycles, both the temperature switch and the timer may be faulty. Procedures for testing the timer can be found on the following page.
Water Level Control Switch
This is another control panel switch, usually located next to the temperature switch. There should be a small hose connected to this switch, and sometimes, this hose becomes loose and falls off the connection. When this happens, the water in the tub usually overflows. To solve this problem, cut about 1/2 inch off the end of the hose and use a push fit to reconnect it to the switch. A push fit is a simple metal fitting that fastens into place by a row of small teeth that grip the tubing. The switch itself can also malfunction, resulting in tub overflow and other water-level trouble in the tub. If you suspect this switch is faulty, remove it by backing out the screws holding it in place and take it to a professional service person for testing.
If you've gotten this far and your washer is still broken, don't give up now. We're only getting started, and your laundry isn't going anywhere. Keep reading because in the next section we'll discuss why it may just be bad timing.
Step 1: Unplug the machine. You can clean out the lid switch port using a wooden manicure stick or even a chopstick.
Step 2: If cleaning doesn't help, remove the top of the cabinet to access the switch itself. With the switch exposed, check to make sure the screws have not become loose. Loose screws can cause the switch to move when the lid is closed or as the machine goes through its cycles. Check the terminals of the switch to make sure they're tight.
Temperature Selector Switch
This control panel switch regulates the temperature of the water in the tub. It also plays a role in controlling the fill cycle. If you suspect this switch is faulty, remove it and take it to a professional service person for testing because this takes special equipment.
If there's a problem with both water temperature and tub filling cycles, both the temperature switch and the timer may be faulty. Procedures for testing the timer can be found on the following page.
Water Level Control Switch
This is another control panel switch, usually located next to the temperature switch. There should be a small hose connected to this switch, and sometimes, this hose becomes loose and falls off the connection. When this happens, the water in the tub usually overflows. To solve this problem, cut about 1/2 inch off the end of the hose and use a push fit to reconnect it to the switch. A push fit is a simple metal fitting that fastens into place by a row of small teeth that grip the tubing. The switch itself can also malfunction, resulting in tub overflow and other water-level trouble in the tub. If you suspect this switch is faulty, remove it by backing out the screws holding it in place and take it to a professional service person for testing.
It's laundry day. You know this because the shirt you're wearing is eight years old and doesn't match your pants in any light. And there's a chance, just a chance, that you're wearing one black sock and one Navy blue sock. So you schlep a heaping hamper to the laundry room and carefully (or not so carefully) separate colors from whites. Then, you cram as many as will fit into the washer, throw in some detergent and hit the START button.
And nothing happens. Midea Washing Machine Repair Abu Dhabi
Suddenly, the piece of machinery you could always count on is on the fritz. Washing machines are the workhorses of the household appliance stable -- in fact, there's even a TED Talk about how they're the most important invention of the Industrial Revolution (source: Rosling]. And when they go down, they're the toughest to get by without. Who wants to drag their laundry down the street to the laundromat and fight other people for the privilege of shoving quarters into a strange machine that you suspect may not take the gentle cycle very seriously?
So, you have a choice to make: Call a repairman or see if you can tackle the problem yourself. Because washing machines do so many things, they may be harder to diagnose than they are to repair. For a household appliance, it's a pretty complicated gizmo - with special timing cycles that operate valves, motors that turn water on, spin the tub, drain water, and control the water temperature.
Note:Many newer washers include electronic diagnostics that can be interpreted from the owner's manual.
Caution:Before you do any work on a washer, make sure it's unplugged. Disconnect the grounding wire and the water hoses.
But diagnosis is possible, even for the do-it-yourselfer. It just takes a little patience and a basic understanding of washing machine mechanics. In this article, we will explain how to troubleshoot your washing machine and describe some quick repairs for common malfunctions.
Keep it Simple: Sometimes the Easiest Answer is the Right One
As we mentioned, washing machines are complex, but there are some simple steps you can take to diagnose common washer problems.
Is the washer receiving power? The first line of defense for any electrical repair is the sincere hope that it's as simple as a loose plug, damaged cord or malfunctioning wall outlet. If all of these check out, it could be a blown fuse or circuit breaker. Either of these can still be a pretty simple fix. But if the machine is receiving power and still not operating, then it's probably time to get to know your washing machine on a deeper level.
After checking for power, the next thing to look at is the water supply. Knobs may get turned inadvertently or hoses could become kinked, so a quick inspection of these parts may yield an answer. Make sure that both water faucets are turned on and that all hoses are properly extended, without kinks. If the washer has a water-saver button, make sure the button is depressed.
If it's not a power or water source issue, the next logical problem may be that the washing machine is not working properly because it needs to be cleaned. In the next section, we'll discuss how to keep dirty clothes from creating a dirty washer. GODREJ Washing Machine Repair Abu Dhabi
Washing Machines Need Cleaning, Too
We interrupt this scintillating mechanical exploration of washing machinemechanics to bring up a very important matter: why your laundry might stink even after a fresh wash. It may be that your washer is dirty.
Regularly clean the top and door of the washer to prevent the buildup of dirt and detergent. When you wash very linty materials, pull lint from the tub after removing the laundry. Built up lint can keep water and detergent from properly circulating and soap deposits themselves may cause laundry to smell bad. To solve this problem, fill the tub with water and add 1/2 cup of baking soda or 3 cups of white vinegar; then run the machine through the complete wash cycle sans laundry [source: DIY Life]. If the deposits are really bad, wash the inside of the tub with a solution of household ammonia and mild detergent. Rinse thoroughly and wipe the tub with liquid bleach. A word of caution: Rinse the tub thoroughly before wiping it out with bleach. The combination of ammonia and bleach forms a potentially dangerous gas called chloramine. This compound can cause health issues ranging from mild skin irritation to digestive and kidney
Finally, run the machine through a complete wash cycle before you put any more laundry in. Hopefully, you were able to address your issue with these simple steps.
But if your problem persists, don't despair. In the next section, we'll discuss disassembling the washer for more thorough repairs.
A Look Under the Hood: Disassembling the Washer
For most repairs and maintenance, the washer cabinet usually requires disassembly. The washer cabinet is where the magic happens, and houses all of the electrical components of the washer. Location varies by manufacturer, but typically this can be found on the top of the machine behind the control panel. This can be relatively simple based on the make and model, but be sure to consult the owner's manual to find out how to disassemble your particular machine properly. Caution:Make sure the power cord and water hoses are disconnected before you disassemble the cabinet or tip it over for service. SIEMENS Washing Machine Repair Abu Dhabi
Here are three steps for basic washer disassembly:
Step 1: Removing the control panel, typically located on top of the machine, usually requires loosening and/or removing a set of retaining screws. These may be located under a piece of molding or trim that needs to be removed in order to see them. Knobs on the control panel are usually friction-fit and will pull off, while others are held by small setscrews, which do not have heads like a typical slotted screw, at the base of the knob. Loosen the setscrews with a screwdriver or Allen wrench and pull the knobs straight off the shafts.
Step 2: To remove the service panel, you also need to remove the retaining screws. First, make sure the machine and the hoses are drained of water. Tip the washer over on its front or side to gain access through the bottom of the machine, which is generally open and doesn't have a service panel.
Step 3: To remove the top of the cabinet, insert a stiff-bladed putty knife into the joint between the top and side panels and give the knife a rap with your fist. This should release the spring clips so that the top can be removed.
Part of what makes washers so hard to repair is that they have so many control devices (components that control other functions, such as switches and timers). Now things start to get a bit more complicated, but don't give up yet. In the next section we will walk you through servicing these slightly more sophisticated parts.
Which Switch to Fix?
Washing machines run through elaborate cycles with multiple settings, which makes them different from your typical household appliance, , that may perform just one or two functions. Here's how to repair some of the common switches and timers.
Lid Switch
The lid switch on a washer often serves as a safety switch, and if it's not working, or if the switch opening in the lid is clogged with detergent, the machine will not run. To check and repair the lid switch:
Step 1: Unplug the machine. You can clean out the lid switch port using a wooden manicure stick or even a chopstick.
Step 2: If cleaning doesn't help, remove the top of the cabinet to access the switch itself. With the switch exposed, check to make sure the screws have not become loose. Loose screws can cause the switch to move when the lid is closed or as the machine goes through its cycles. Check the terminals of the switch to make sure they're tight.
Temperature Selector Switch
This control panel switch regulates the temperature of the water in the tub. It also plays a role in controlling the fill cycle. If you suspect this switch is faulty, remove it and take it to a professional service person for testing because this takes special equipment.
If there's a problem with both water temperature and tub filling cycles, both the temperature switch and the timer may be faulty. Procedures for testing the timer can be found on the following page.
Water Level Control Switch
This is another control panel switch, usually located next to the temperature switch. There should be a small hose connected to this switch, and sometimes, this hose becomes loose and falls off the connection. When this happens, the water in the tub usually overflows. To solve this problem, cut about 1/2 inch off the end of the hose and use a push fit to reconnect it to the switch. A push fit is a simple metal fitting that fastens into place by a row of small teeth that grip the tubing. The switch itself can also malfunction, resulting in tub overflow and other water-level trouble in the tub. If you suspect this switch is faulty, remove it by backing out the screws holding it in place and take it to a professional service person for testing.
If you've gotten this far and your washer is still broken, don't give up now. We're only getting started, and your laundry isn't going anywhere. Keep reading because in the next section we'll discuss why it may just be bad timing.
- The lid switch on a washer often serves as a safety switch, and if it's not working, or if the switch opening in the lid is clogged with detergent, the machine will not run. To check and repair the lid switch:
Step 1: Unplug the machine. You can clean out the lid switch port using a wooden manicure stick or even a chopstick.
Step 2: If cleaning doesn't help, remove the top of the cabinet to access the switch itself. With the switch exposed, check to make sure the screws have not become loose. Loose screws can cause the switch to move when the lid is closed or as the machine goes through its cycles. Check the terminals of the switch to make sure they're tight.
Temperature Selector Switch
This control panel switch regulates the temperature of the water in the tub. It also plays a role in controlling the fill cycle. If you suspect this switch is faulty, remove it and take it to a professional service person for testing because this takes special equipment.
If there's a problem with both water temperature and tub filling cycles, both the temperature switch and the timer may be faulty. Procedures for testing the timer can be found on the following page.
Water Level Control Switch
This is another control panel switch, usually located next to the temperature switch. There should be a small hose connected to this switch, and sometimes, this hose becomes loose and falls off the connection. When this happens, the water in the tub usually overflows. To solve this problem, cut about 1/2 inch off the end of the hose and use a push fit to reconnect it to the switch. A push fit is a simple metal fitting that fastens into place by a row of small teeth that grip the tubing. The switch itself can also malfunction, resulting in tub overflow and other water-level trouble in the tub. If you suspect this switch is faulty, remove it by backing out the screws holding it in place and take it to a professional service person for testing.
العرض العادي
الانتقال إلى العرض المتطور
الانتقال إلى العرض الشجري
